gauges by shifter

This is the place to discuss DIESEL engine modifications.
Post Reply
Regular Member
Posts: 124
Joined: Wed Jul 08, 2020 3:18 am
Location: Bay Minette , Alabama
Isuzu vehicle(s): 1982 Isuzu I-mark engine 1.8 liter diesel, 1987 PUP

gauges by shifter

Post by bthood »

Hey guys,
I found a gauge set the goes by the shifter for my truck. It voltage, clock, and oil. This came from a gas engine. Mine is a diesel. Can I use these on a diesel? if so, how do I wire this? I got the complete harness that clips into another harness under the dash.
User avatar
Regular Member
Posts: 2954
Joined: Thu Mar 29, 2012 5:20 pm
Location: Everertt, WA
Isuzu vehicle(s): 83 Dsl LS Long Bed 4x4, 82 Dsl 2wd Short Bed 5 spd

Re: gauges by shifter

Post by Halden »

There is an oil pressure sender that Ts off of where the pressure switch is.

As to how the voltmeter and clock are wired in I'd have to look.
It's not pronounced "Ih-soo-zoo", it's pronounced "It-screws-you"
83 LS Long Box Dsl 4x4
82 Short Box Dsl 5 spd
64 Chevy C20 w/ 283 & 4 speed.
05 Sonata with a standard
Post Reply